LHP40K-G wheeled wet spray manipulator

LHP40K-G

The LHP40K-G wheeled wet spray manipulator is a special piece of equipment developed and upgraded based on domestic initial tunnel support concrete spraying technology and high-altitude construction conditions. The maximum spraying volume is 40m³/h, and the equipment is widely used in tunnel engineering, water conservancy engineering, municipal engineering, road and bridge engineering, and other applications. This equipment features a large spraying volume, low rebound, stable and reliable performance, and pipes will not easily block. It is suitable for both full-section, half-section and multi-step excavation.

Performance parameters

Transport dimensions (L × W × H)	8400×2850×3300mm
Model	LHP40K-G
Total weight	19t
Engine power	103kW
Installed electrical power	165kW
Operating mode	Electric construction + diesel-powered emergency
Control mode	Wireless remote control
Operating voltage	380V
Operating range (width × height)	26×15m
Chassis form	Operating chassis
Driving mode	One-way driving
Driving and steering methods	Four-wheel drive, front-wheel steering
Minimum ground clearance	460mm
Turning radius	10m (two wheels)
Maximum speed	15km/h
Approach angle/departure angle	21°/19°
Maximum spraying volume	40m³/h
Maximum particle size for spray aggregate	25mm
Hopper capacity	0.3m³
Capacity of quick-setting agent tank	1.5m³
Form of quick-setting agent pump	Squeeze pump
Discharge volume	20m³/min
Discharge pressure	0.7Mpa